EcoPlus Submersible Pump Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors. UL listed.

EcoPlus Submersible Pump are great for everything from fountains to hydroponic systems.

• Powerful oil free high magnetic rotor.
• Ceramic shaft and bearing insures reliability and quiet operation.
• Trouble free one moving part.
• Strainer protects impeller from damage.
• 264 Fixed Flow Submersible/Inline Pump 290 GPH
• 396 Fixed Flow Submersible/Inline Pump 396 GPH
• 633 Fixed Flow Submersible/Inline Pump 594 GPH
• 1056 Fixed Flow Submersible/Inline Pump 1000 GPH
• 1267 Fixed Flow Submersible/Inline Pump 1347 GPH
• 1584 Fixed Flow Submersible/Inline Pump 1638 GPH

EcoPlus Submersible Pump CAUTION:

• Thermally protected enclosure: Type 3 for indoor and outdoor use.
  Electrical Warning: Risk of electric shock
• This pump is supplied with a grounding conductor, grounding type attachment plug.
  To reduce risk of electric shock:
• Install only on a circuit protected by a ground-fault circuit interrupter (GFCI).
• See “User Guide” section for proper installation.
• Use only on portable self-contained tanks, reservoirs, ponds and fountains no
  larger than 5 feet in any dimension.

Before operating pump:

1. Check that the power voltage and frequency conforms to the power ratings on the nameplate.
2. Don’t lift, lower or carry pump by the power cable.
3. Always unplug the pump when not in use. Do not place hands in water where the pump is
installed or before performing any maintenance and cleaning.
4. Do not add any lubricants to the pump.
5. Do not operate the pump without water as this will cause severe damage.
5. This pump is not self-priming. Make sure the water lines and pump(s) are filled with water
prior to turning on.
6. Do not install or store the pump where it will be exposed to weather or temperatures
below freezing.
7. Do not operate pump in water temperatures higher than 95º F