Aqua-X AMP-2
February 15, 2021
Aqua-X PCT-1
February 15, 2021

Aqua-X PPH-1

111.96 $USD

Reservoir pH Sensor for the Aqua-X Irrigation Control System.

Aqua-X PPH-1 Reservoir pH Sensor

The TrolMaster Aqua-X PPH-1 probe provide accurate and reliable monitoring of waters pH. The PPH-1 connects to the Aqua-X NFS-1 via the AMP-2.

*pH probes must be stored using storage cap and correct storage solution. If pH probe completely dries out, will no longer function correctly. Any pH probe returned without the cap and in a “dry” state” will not be eligible for a warranty.

  • Suitable for wide range of applications: Hydroponics, Aquariums, Laboratory etc.
  •  3.6-meter long cable for flexible placement.
  •  BNC terminal allows direct connection to AMP-2 Sensor Board.


  • Working Environments:            Temperature 32-122°F, Humidity<90%
  • Package Dimensions:              275mm(L) x 85mm(W) x 95mm(H)

Requires Aqua-X Irrigation Control System (NFS-1)

The Aqua-X system is a professional-grade irrigation control system. A fully customizable modular designed system. Installation is simple and system is easily expandable. Aqua-X can control up to 30 irrigation zones (24vac solenoid valves or 120vac pumps). The Aqua-x monitors pH / EC and water temp and monitor actual growing medium moisture levels by using up to (8) Water Content Sensors connected to a single Aqua-x controller. The timers can be set-up to be recycling timers, or to operate at specific time of day and durations. With the free TrolMaster App, the user can access all of the settings and alerts on the system from anywhere at anytime.


Aqua-X irrigation Controller is a pioneering and innovational hydroponic irrigation control system. This smartphone App based system can control up to 30 outputs (24V or 110V) and monitor the pH.EC and water temperature of nutrient. Water detectors for watering confirmation allow the system to send alerts to user when the watering schedule fails. With its incredible flexibility, everyone could easily automate their irrigation systems.

The system could control pumps by 110V Control Board and solenoid valves by 24V Control Board. When the massive control outputs, user could manage delivery schedule for multiple nutrients, multiple rooms and multiple zones.

A sensor board with EC/pH/Temp sensors is also available to allow user to monitor and log all the historical data of their nutrients. When the measured value exceeds your custom setting range, a warning message will be sent to your smartphone.

Free smartphone App allows user to monitor and control their watering schedules at their fingertips. Graphic interface makes multiple schedules easy to adjust and monitor. The innovational watering confirmation feature saves enormous loss by watering failures.

Here are some important things to consider when using the Aqua-X irrigation Controller
  • Each set of Aqua-X Irrigation Controller can correct up to 30 outputs(24V or 110V) and monitor the pH value, EC value and water temperature of nutrient.
  • There are two RJ12 ports for the Control Board. One for 24V Control Board (6 individually controlled 24V outputs for solenoid valves), the other 110V control Board (6 individually controlled 110V outputs for water pumps). The maximum number of connections to the Aqua-X is 5 pieces for either 24V Control Board or 110V Control Board. The Program Device Station (DSP-1 from Hydro System) is also compatible to the Aqua-X through the 110V CONTROL port. 24V Control Board ( 6 outputs each). 110V Control Board (6 outputs each) and Program Device Station (1 output each) can use together but each Aqua-X only controls up to 30 outputs.
  • The Water Detector port looks identical to the Control Board port. Make sure not to mix them up. The Water Detector port is positioned between the Sensor Board port Micro SD slot.
  • pH Sensor and EC/Temp Sensor should be connected to Sensor Board (AMP-2) and then connect the Sensor Board to the Aqua-X with a mini-DIN cable.
  • A maximum distance of 1000ft / 300 meters between the NFS-1 irrigation Controller and the devices controlled.
  • Follow all local and national electrical codes for installation requirement


Weight 1 kg
Dimensions 8 × 4 × 4 in


There are no reviews yet.

Be the first to review “Aqua-X PPH-1”

Your email address will not be published. Required fields are marked *