By Progressive Growth
- In a 5 gallon bucket, fill with 3 gallons of water
- Add 13 drops of Superthrive per gallon (39 drops total)
- Adjust PH level of water to 5.0
- Add rockwool cubes to water and soak for 24 hours
- Next day pull cubes out of water and extract 80% of the water from the cube
- Put some of your cloning gel/powder into a clean small cup
- Take some of the water you soaked the cubes in and put into a clean bowl
- Cut clones and place cut end in the bowl of water for 20 minutes
- Dip cuttings in gel/powder and insert cutting into cube
- If hole provided in cube is not the right size, then make a new hole
- Place cube with clone in it into prop flat (30-35 per flat), place humidity dome on flat and put under 24 hours of light
- Clean domes of moisture at least twice per day
- In 4-5 days or when very dry, add small amount of water to each cube
(dip cube in bowl of water about ½ way up)
If Superthrive is not available, Use another B1 product. (B52 / Vitamax / Thrive Alive)
